1969 Corvette Premium Shoulder Retractors
Price:
$329.95
Description
Please Note: 1969 Shoulder Retractor mounts Vertically.
Product Availability:
- All colors are considered special order.
- Special order items ship within 2 weeks unless in stock.
- In stock items ship within 1 business day.
Product Specs:
- Original 3 Panel Seat Belt Webbing.
- Includes Shoulder Retractors Only.
- Aftermarket style will not fit with factory lap belt.
- Choose color (see swatches below).
- Fits 1969.
- Sold as a Pair.
What is 3-Panel Webbing?
Corvette/GM 3 Panel webbing is a restoration quality seat belt webbing. Made to look and feel vintage, It is softer and more flexible than our standard 7 panel webbing.
California Prop 65 Warning:Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ShippingShipping Policy
We offer $8.00 Standard Shipping via USPS Priority Mail or FedEx Ground. Most orders will arrive in 2-5 business days. However, depending on stock levels, some orders may take up to 10 business days for delivery. Expedited shipping may be available on some items, please call us for more information at 800-445-2847.
You will be notified via e-mail when your order has shipped with tracking information if it is available.
Most items that we sell are in stock and ship from our warehouse every business day. Orders received before 2 pm PST typically ship the same business day unless the item is a Special Order item. Orders received after 2 pm typically ship the next business day.
Please note, expedited shipping does not decrease time needed for production on Special Order items. Special Order items will be shipped after the specified production time.
NOTE: $8.00 shipping only valid for orders shipping within the lower 48 states. Alaska, Hawaii, US Territories and Military Bases will be charged $16.00 for shipping. We do not ship outside of the USA.Return Policy
Before returning any item, you must call us at 1-800-445-2847 or 1-760-477-8521 for a return authorization. All returned items must be in new, non-installed condition. We accept returns within 90 days of purchase. After 90 days, we cannot accept returns or exchanges.
We do not accept returns on seat belts that have been installed. These are safety items. Once they have been installed they cannot be resold. There are no exceptions to this policy. Any bolt markings on the seat belt ends will be considered an installed belt and will not be accepted as a return.
You may take seat belts out of the package to inspect them. We recommend holding them up to existing belts to compare. If you have any concerns whether our belts will fit your vehicle please take all proper measurements and compare them with our seat belts before installing.
All returns are subject to a 10% restocking fee. Special order items are subject to a 50% restocking fee. We ask that you please return items in their original packaging, with a copy of the original invoice.
Shipping charges are non-refundable. Customers are also responsible for return shipping charges.
There are no returns accepted on custom orders, seat belt webbing, or closeout items.What Seat Belts Will Fit My Car? Check Before Ordering!
Our universal seat belts are designed to be generic in order to cover as many applications as possible. There is no list or reference that matches our aftermarket Seat Belts with your factory application. We can tell you how to measure and examine your existing seat belt to find the best replacement available based on length and buckle style.
This is an aftermarket/universal seat belt and is not meant to work with OEM factory components or sensors. Seat belts must be replaced as a complete unit. Do NOT mix and match our tongues/buckles with original equipment components, they will not match up correctly. Always check if our belts will be long enough to fit your application prior to ordering.
How to Measure for a 3 Point Retractable Lap & Shoulder Seat Belt
Our 3 Point Retractable lap & shoulder seat belts vary in lengths depending on buckle style so be sure to pre-measure if our seat belt will fit your application. The length you need will be determined by a number of factors including the location of mounting points, position of seat, style of seat, and intended user.
- To measure for a 3 Point Retractable Lap & Shoulder Seat Belt, first extend your current seat belt to a comfortable length and position. If your car currently does not have seat belts you can substitute a piece of rope where a seat belt would normally mount and use it as a reference for measurements.
- You will want to measure for 2 lengths: Length of (A) buckle side, and length of (B1 + B2 + B3) retractable lap & shoulder side.
- Check if our seat belt buckle/sleeve side will be long enough to be accessible at the sides of your seat. For example, if your current seat belt buckle sits 18 inches from the floor then seat belt with a 12 inch plastic sleeve will not be long enough for your application without an extender bracket.
- To get a measurement for retractable lap & shoulder side start at the bottom mounting bolt. Measure from (B1) floor mount to shoulder top mount, diagonally down (B2) across your chest to seat belt buckle, and (B3) back across your lap down to retractor mounting location. Make sure this combined length does not exceed the total length of our retractable seat belts.
- Check seat belt webbing will not rub against any interior components or seat frame.
Mounting a 3 Point Retractor Housing
Our retractable seat belts use inertia locking retractors. Whenever there is a sudden tug on the webbing, the inertia clutch inside the housing spins out and locks the webbing reel from releasing any more webbing. Inertia locking retractors allow the user to move freely while wearing the seatbelt until the retractor senses a sharp pull.
- Inertia locking retractors are aftermarket products and work independently of any brake systems and O.E. wiring sensors.
- This seat belt's retractor mechanism must be mounted vertically in order for inertia locking centrifuge to function properly. Retractor must mount either on floor (mount upright with an "L" Bracket) or can be mounted on door pillar if mount already exist.
- Do not mount retractor diagonally or horizontally. A tilting retractor will not function properly and can result in serious injury or death.
- Do not mount retractor on ceiling, body quarter panels, inside seats, attached behind seat, or feeding through seats.
Customer Reviews
{{ reviewCount }} Customer {{ (reviewCount === 1) ? 'Review' : 'Reviews' }}, {{ reviewAverage }} Average ScorePage {{ currentPage }} out of {{ totalPages }}{{ review.user.display_name }}Verified Purchase{{ formatDate(review.created_at) }}{{ textDecode(review.content) }}Page {{ currentPage }} out of {{ totalPages }}Community Q&A
{{ totalQuestions }}{{ (totalQuestions === 1) ? ' Question' : ' Questions' }} with {{ totalAnswers }}{{ (totalAnswers === 1) ? ' Answer' : ' Answers' }}Ask a QuestionQuestionNameEmailSubmit QuestionA confirmation email will be sent to your email address before your question can be posted.Success!Uh OhPage {{ currentPage }} out of {{ totalPages }}{{ question.asker.display_name }}QUESTION{{ textDecode(question.content) }}{{ answer.answerer.display_name }}Store OwnerCOMMUNITY ANSWER {{ textDecode(answer.content) }}Page {{ currentPage }} out of {{ totalPages }}Videos & Resources:
How to Measure your Seat Belt.
Seat Belt Video Segment.
Copyright © 2024 SeatBeltsPlus.com. All Rights Reserved. All images protected by US and International copyright laws. No part of this website may be reproduced, distributed, or transmitted in any form or by any means. All prices subject to change without notice or obligation. Not responsible for typographical or photo errors.