3 Point Seat Belt - Non-Retractable - Plastic Push Button Buckle - with Sleeve - Charcoal

Our 3 Point Adjustable Lap & Shoulder Seat Belts are offered with a variety of buckles & sleeves to best fit your application. 3 Point Adjustable Lap & Shoulder Seat Belts are not retractable. They do however have an adjuster at the shoulder swivel which allows you to adjust the webbing length similar to what you might find on a backpack strap. Be sure to pre-measure if our seat belt will fit your application. The length you need will be determined by a number of factors including the location of mounting points, position of seat, style of seat, and intended user.

• To measure for a 3 Point Adjustable Lap & Shoulder Seat Belt, first extend your current seat belt to a comfortable length and position. If your car currently does not have seat belts you can substitute a piece of rope where a seat belt would normally mount and use it as a reference for measurements.
• You will want to measure for 2 lengths: Length of (A) buckle side, and length of (B1 + B2) adjustable lap & shoulder side.
• Check if our seat belt buckle/sleeve side will be long enough to be accessible at the sides of your seat. For example, if your current seat belt buckle sits 18 inches from the floor then seat belt with a 12 inch plastic sleeve will not be long enough for your application without an extender bracket.
• To get a measurement for adjustable lap & shoulder side start at the bottom mounting bolt. Measure from floor mounting bolt, (B1) up across your lap to seat belt tongue and then measure (B2) up across your shoulder to top mount location. Remember, our seatbelts can be shortened in length so there will be some extra webbing at the top adjuster when seat belt is not fully extended.
• Make sure seat belt webbing will not rub against any interior components or seat frame.
• If needed, we can always special order custom length seat belts for application that require off-set buckles.